Table of Content
T-Shirts White and Light Colored
T-Shirts White and Light Colored
TheMagicTouch TTC 3.1
Specially made for CMYK color laser and LED printers.
TheMagicTouch TTC 3.1
Specially made for CMYK color laser and LED printers.
TheMagicTouch TTC 3.1
Specially made for CMYK color laser and LED printers.
T-Shirts White and Light Colored
T-Shirt Black and Colored
- TheMagicTouch OBM 5.4
- TheMagicTouch WTT
- TheMagicTouch WOW – Darrk
Sweaters, Hoodies and Zoodies White and Light Colored
- TheMagicTouch TTC 3.1
- TheMagicTouch T.ONE
- TheMagicTouch WOW – Dark
Sweaters, Hoodies and Zoodies Black and Light Colored
- TheMagicTouch OBM 5.4
- TheMagicTouch WTT
- TheMagicTouch WOW – Dark
Candles, Modell-building & smooth non porous products that cannot be transferred with a heat press
- For colored surfaces TheMagicTouch DCT 4.5W offers a white opaque transfer layer.
- For white surfaces TheMagicTouch DCT 4.5C offers a transparent transfer layer.
For this transfer paper the squeegee is very useful.
Temporary Tattoo’s
The temporary tattoos are used in sports competitions, as entry tickets, or in the theater and film industry or those who want to try it out once.
Hard Surfaced products and materials
Like Ceramics, Metal, and Rigid Plastics (Smooth Hard Surfaces)
As TheMagicTouch CPM 6.2 relies on the adhesion of only the toner image on the substrate. This means the exact instructions vary, depending on the surface and heat transition of the substrate.
Therefore, with all our blank products that can be printed with TheMagicTouch CPM 6.2, the instructions are on the product page.
Below you will find the instructions for the most common general products that can be printed using TheMagicTouch CPM 6.2 transfer paper:
Display Cardboard
- Temperature: 140°C
- Time: 5 seconds
- Pressure: High Pressure
- Application: Place Transfer Face down
- Transfer Removal: Warm Peel
Notes: Overlapping the cardboard with the transfer gives the best results.
Glas upto 1 cm/0,4” thickness
- Temperature: 150°C
- Time: 120 seconds
- Pressure: Medium
- Application: Place Transfer Face up, Glass on top, cover with TheMagicTouch Release Paper
- Transfer Removal: Warm Peel
Notes: Placing the Glass on top of the transfer makes for easier aligning of the design
Glas from 1 cm/0,4” and thicker
- Temperature: 150°C
- Time: 180 seconds
- Pressure: Medium Pressure
- Application: Place Transfer Face up, Glass on top, cover with TheMagicTouch Release paper
- Transfer Removal: Warm Peel
Notes: Placing the Glass on top of the transfer makes for easier aligning of the design.
For glass thicker than 1,5cm/0,60” add 5 seconds for each mm/0,04”of extra thickness.
Leather / PU-Leather
- Temperature: 160°C
- Time: 60 seconds
- Pressure: High Pressure
- Application: Place transfer Face down, TheMagicTouch Application Sponge on top.
- Transfer Removal: Warm Peel
Notes: Slightly moisten TheMagicTouch Application Pad with water sprayer prior to pressing.
Metal / Aluminium
- Temperature: 160°C
- Time: 90 seconds
- Pressure: High Pressure
- Application: Place transfer Face down, cover with TheMagicTouch T-pad
- Transfer Removal: Warm Peel
Notes: Add 30 seconds to the pressing time if the metal is thicker than 5 mm/ 0,02”.
Tile (ongecoat)
- Temperature: 170°C
- Time: 300 seconds
- Pressure: Medium
- Application: Place transfer Face down, cover with TheMagicTouch T-pad
- Transfer Removal: Cold Peel
Notes: Place the tile in the middle of the heat press for even pressure. Place The tile on a peace of paper for protecting of the rubber of the lower platen.
Mirror Tiles
- Temperature: 160°C
- Time: 60 seconds
- Pressure: Medium
- Application: Place transfer Face down, cover with TheMagicTouch T-pad
- Transfer Removal: Warm Peel
Notes: White toner will make the image less transparent on the mirror.
Now that you’ve found your match, you’re ready to create. Choosing the right paper is the first step toward a professional result that lasts. If you’re ever unsure or working with a unique material, just let our team know through our support form so we can help you out!
4.8
